Wednesday, December 7, 2016

CCNAv3 Completed Packet Tracer 9.3.1.4

Greetings, and welcome to Seeseenayy.
You are visiting one of our many posts about packet tracer activities!


This post contains the answers to the 
CCNA3 Packet Tracer '9.3.1.4'


This post is split into two parts.
1. The download link of the completed packet tracer, and sometimes completed, or uncompleted PDFs or other files.


2. Tutorial. A text guide on how the packet tracer was completed, command-by-commandstep-by-step.

To view this post, and discover the answers to this activity, click on the following link if you have not done so already.




Downloads / Information

You may find the download to this packet tracer, or any other related file, directly below:

ONLY THE COMPLETED PDF IS AVAILABLE, EITHER THROUGH DOWNLOAD OR BELOW.


Tutorial
Here are the following commands to configure this packet tracer. The source of these commands came from the packet tracer's instructions, so refer there if you're confused on why what argument/parameter went where or whathaveyou. Again, if you don't understand why, ask a question below.

Router R1 Configuration Commands
======================================================
R1>en
R1#conf t
R1(config)#router ospf 1
R1(config-router)#router-id 1.1.1.1
R1(config-router)#network 172.31.24.0 0.0.3.255 area 10
R1(config-router)#network 172.31.31.248 0.0.0.3 area 0
R1(config-router)#network 172.31.31.252 0.0.0.3 area 0
R1(config-router)#passive-int G0/0
R1(config-router)#passive-int G0/1
R1(config-router)#ex
R1(config)#ip route 0.0.0.0 0.0.0.0 S0/1/0
R1(config)#router ospf 1
R1(config-router)#default-info origin
R1(config-router)#area 0 auth message-digest
R1(config-router)#ex
R1(config)#int s0/0/0
R1(config-if)#ip ospf message-digest-key 1 md5 cisco123
R1(config-if)#ex
R1(config)#int s0/0/1
R1(config-if)#ip ospf message-digest-key 1 md5 cisco123
R1(config-if)#exit
R1(config)#access-list 1 permit 172.31.24.1 0.0.0.0
R1(config)#line vty 0 15
R1(config-line)#access-class 1 in
R1(config-line)#exit
R1(config)#exit
R1#


Router R2 Configuration Commands
======================================================
R2>en
R2#conf t
R2(config)#router ospf 1
R2(config-router)#router-id 2.2.2.2
R2(config-router)#network 172.31.28.0 0.0.1.255 area 20
R2(config-router)#network 172.31.31.248 0.0.0.3 area 0
R2(config-router)#passive-int G0/0
R2(config-router)#passive-int G0/1
R2(config-router)#area 0 auth message-digest
R2(config-router)#ex
R2(config)#int S0/0/0
R2(config-if)#ip ospf message-digest-key 1 md5 cisco123
R2(config-if)#exit
R2(config)#exit
R2#


Router R3 Configuration Commands
======================================================
R3>en
R3#conf t
R3(config)#router ospf 1
R3(config-router)#router-id 3.3.3.3
R3(config-router)#network 172.31.30.0 0.0.0.255 area 30
R3(config-router)#network 172.31.31.252 0.0.0.3 area 0
R3(config-router)#passive-int G0/0
R3(config-router)#passive-int G0/1
R3(config-router)#area 0 auth message-digest
R3(config-router)#exit
R3(config)#int G0/0
R3(config-if)#ip add 172.31.30.126 255.255.255.128
R3(config-if)#no sh
R3(config-if)#ex
R3(config)#int G0/1
R3(config-if)#ip add 172.31.30.254 255.255.255.128
R3(config-if)#no sh
R3(config-if)#ex
R3(config)#int S0/0/1
R3(config-if)#ip ospf message-digest-key 1 md5 cisco123
R3(config-if)#ex
R3(config)#ex

PC Addressing Configuration
======================================================
PC-E:
   > IP Address: 172.31.30.1
   > Subnet Mask: 255.255.255.128
   > Default Gateway: 172.31.30.126
   
PC-F:
   > IP Address: 172.31.30.129
   > Subnet Mask: 255.255.255.128
   > Default Gateway: 172.31.30.254


1 comment:

Feel free to comment if you have a question, commendation, or concern. We love to hear your feedback!

Please do not share links to external websites if it not relevant to discussion. We reserve our right to remove any content we deem advertising.