Wednesday, December 7, 2016

CCNAv3 Completed Packet Tracer

Greetings, and welcome to Seeseenayy.
You are visiting one of our many posts about packet tracer activities!

This post contains the answers to the 
CCNA3 Packet Tracer ''

This post is split into two parts.
1. The download link of the completed packet tracer, and sometimes completed, or uncompleted PDFs or other files.

2. Tutorial. A text guide on how the packet tracer was completed, command-by-commandstep-by-step.

To view this post, and discover the answers to this activity, click on the following link if you have not done so already.

Downloads / Information

You may find the download to this packet tracer, or any other related file, directly below:

Below are the following commands to solve this packet tracer, as well as a minor explanation as to why we use these commands.

Configuring R1: Grab an image from the TFTP server via router.
Cisco walks you through on how this is done, so just follow it's guiding. Though you should remember how this is done-- and especially *hint hint*-- the inverse on how to get a file from your device TO the server.
R1#show flash
R1#copy tftp: flash:
Address or name of remote host []?
Source filename []? c1841-ipbasek9-mz.124-12.bin
Destination filename [c1841-ipbasek9-mz.124-12.bin]? *enter*
R1#conf t
R1(config)# boot system flash c1841-ipbasek9-mz.124-12.bin

Configuring S1: Grab an image from the TFTP server via switch.
They're done in the same way, so don't fret, it's not a super complicated task.
S1#show flash
S1#copy tftp: flash:
Address or name of remote host []?
Source filename []? c2960-lanbase-mz.122-25.FX.bin
Destination filename [c2960-lanbase-mz.122-25.FX.bin]? *enter*

Configuring R2: Copy the IOS version R2 currently has to the TFTP server.
I know the PT doesn't tell you how to copy to a server like they provided earlier for R1 and actually copying from the server. Using common sense, it's literally the opposite of the ways we've grabbed IOS files off the TFTP server.
R2#show flash
R2#copy flash: tftp:
Source filename []? c1900-universalk9-mz.SPA.151-4.M4.bin
Address or name of remote host []?
Destination filename [c1900-universalk9-mz.SPA.151-4.M4.bin]? 

1 comment:



Feel free to comment if you have a question, commendation, or concern. We love to hear your feedback!

Please do not share links to external websites if it not relevant to discussion. We reserve our right to remove any content we deem advertising.