Wednesday, November 30, 2016

CCNAv3 Completed Packet Tracer 8.3.1.2

Greetings, and welcome to Seeseenayy.
You are visiting one of our many posts about packet tracer activities!


This post contains the answers to the 
CCNA3 Packet Tracer '8.3.1.2'


(above image is a preview of the packet tracer)

This post is split into two parts.
1. The download link of the completed packet tracer, and sometimes completed, or uncompleted PDFs or other files.


2. Tutorial. A text guide on how the packet tracer was completed, command-by-commandstep-by-step.

To view this post, and discover the answers to this activity, click on the following link if you have not done so already.




Downloads / Information
You may find the download to this packet tracer, or any other related file, directly below:


Tutorial
Below are the following commands to solve this packet tracer, as well as a minor explanation as to why we use these commands.

It's EIGRP. It should not be that hard. If you have questions, comment below. If there's an error here, use the report feature on the contact us page. We may delete said types of comments, 

Step 1. Configure R1 for EIGRP.
R1 (RT) CONFIGURATION

R1>en
R1#conf t
R1(config)#router eigrp 1
R1(config-router)#network 172.31.0.0 0.0.255.255
R1(config-router)#network 172.31.6.0 0.0.0.3
R1(config-router)#no auto-summary
R1(config-router)#passive-int default
R1(config-router)#no passive-int s0/0/0
R1(config-router)#exit
R1(config)#int s0/0/0
R1(config-if)#ip hello-interval eigrp 1 10
R1(config-if)#exit
R1(config)#int s0/0/0
R1(config-if)#ip summary-address eigrp 1 172.31.0.0 255.255.254.0
R1(config-if)#exit
R1(config)#exit
R1#


Step 2. Configure R2 for EIGRP.
R2 (RT) CONFIGURATION

R2>en
R2#conf t
R2(config)#router eigrp 1
R2(config-router)#no auto-summary
R2(config-router)#network 10.0.0.0 0.255.255.255
R2(config-router)#network 10.10.8.0 0.0.0.3
R2(config-router)#passive-int default
R2(config-router)#no passive-int s0/0/1
R2(config-router)#exit
R2(config)#int s0/0/1
R2(config-if)#ip hello-interval eigrp 1 10
R2(config-if)#ip summary-address eigrp 1 10.10.0.0 255.255.248.0
R2(config-if)#exit
R2(config)#exit
R2#

Step 3. Configure IPv4-Edge for EIGRP.
IPv4-Edge (RT) CONFIGURATION

IPv4-Edge>en
IPv4-Edge#conf t
IPv4-Edge(config)#router eigrp 1
IPv4-Edge(config-router)#no auto-summary
IPv4-Edge(config-router)#passive-int default
IPv4-Edge(config-router)#no passive-int s0/0/0
IPv4-Edge(config-router)#no passive-int s0/0/1
IPv4-Edge(config-router)#network 172.31.6.0 0.0.0.3
IPv4-Edge(config-router)#network 10.10.8.0 0.0.0.3
IPv4-Edge(config)#ip route 0.0.0.0 0.0.0.0 s0/1/0
IPv4-Edge(config)#
IPv4-Edge(config)#router eigrp 1
IPv4-Edge(config-router)#redist stat
IPv4-Edge(config-router)#exit
IPv4-Edge(config)#int s0/0/0
IPv4-Edge(config-if)#ip hello-interval eigrp 1 10
IPv4-Edge(config-if)#exit
IPv4-Edge(config)#int s0/0/1
IPv4-Edge(config-if)#ip hello-interval eigrp 1 10
IPv4-Edge(config-if)#exit
IPv4-Edge(config)#

Step 4. Configure IPv6-Edge for EIGRP.
IPv6-Edge (RT) CONFIGURATION

IPv6-Edge>en
IPv6-Edge#conf t
IPv6-Edge(config)#ipv6 uni
IPv6-Edge(config)#ipv6 router eigrp 1
IPv6-Edge(config-rtr)#eigrp router-id 1.1.1.1
IPv6-Edge(config-rtr)#exit
IPv6-Edge(config)#ipv6 route ::/0 s0/1/0
IPv6-Edge(config)#ipv6 router eigrp 1
IPv6-Edge(config-rtr)#redist st
IPv6-Edge(config-rtr)#exit
IPv6-Edge(config)#int s0/0/1
IPv6-Edge(config-if)#ipv6 eigrp 1
IPv6-Edge(config-if)#exit
IPv6-Edge(config)#int s0/0/0
IPv6-Edge(config-if)#ipv6 eigrp 1
IPv6-Edge(config-if)#exit
IPv6-Edge(config)#ipv6 router eigrp 1
IPv6-Edge(config-rtr)#no sh
IPv6-Edge(config-rtr)#exit
IPv6-Edge(config)#exit
IPv6-Edge#


Step 5. Configure R3 for EIGRP.
R3 (RT) CONFIGURATION

R3>en
R3#conf t
R3(config)#ipv6 uni
R3(config)#ipv6 router eigrp 1
R3(config-rtr)#eigrp router-id 3.3.3.3
R3(config-rtr)#no sh
R3(config-rtr)#exit
R3(config)#int lo0
R3(config-if)#ipv6 eigrp 1
R3(config-if)#exit
R3(config)#int lo1
R3(config-if)#ipv6 eigrp 1
R3(config-if)#exit
R3(config)#int lo2
R3(config-if)#ipv6 eigrp 1
R3(config-if)#exit
R3(config)#int lo3
R3(config-if)#ipv6 eigrp 1
R3(config-if)#exit
R3(config)#int s0/0/0
R3(config-if)#ipv6 eigrp 1
R3(config-if)#ipv6 summary-address eigrp 1 2001:DB8:1:1:A000::/70
R3(config-if)#exit
R3(config)#

Step 6. Configure R4 for EIGRP.
R4 (RT) CONFIGURATION
--------------------------
R4>en
R4#conf t
R4(config)#ipv6 uni
R4(config)#ipv6 router eigrp 1
R4(config-rtr)#eigrp router-id 4.4.4.4
R4(config-rtr)#no sh
R4(config-rtr)#exit
R4(config)#int lo8
R4(config-if)#ipv6 eigrp 1
R4(config-if)#exit
R4(config)#int lo9
R4(config-if)#ipv6 eigrp 1
R4(config-if)#exit
R4(config)#int lo10
R4(config-if)#ipv6 eigrp 1
R4(config-if)#exit
R4(config)#int lo11
R4(config-if)#ipv6 eigrp 1
R4(config-if)#exit
R4(config)#int s0/0/1
R4(config-if)#ipv6 eigrp 1
R4(config-if)#ipv6 summary-address eigrp 1 2001:DB8:1:1:BB80::/74
R4(config-if)#exit
R4(config)#exit










No comments:

Post a Comment

Feel free to comment if you have a question, commendation, or concern. We love to hear your feedback!

Please do not share links to external websites if it not relevant to discussion. We reserve our right to remove any content we deem advertising.