Monday, October 10, 2016

CCNAv3 Completed Packet Tracer 4.5.1.2

Greetings, and welcome to Seeseenayy.
You are visiting one of our many posts about packet tracer activities!

This post contains the answers to the 
CCNA3 Packet Tracer '4.5.1.2'

(above image is a preview of the packet tracer)

This post is split into two parts.
1. The download link of the completed packet tracer, and sometimes completed, or uncompleted PDFs or other files.

2. Tutorial. A text guide on how the packet tracer was completed, command-by-commandstep-by-step.


To view this post, and discover the answers to this activity, click on the following link if you have not done so already.


Downloads / Information
You may find the download to this packet tracer, or any other related file, directly below:

Tutorial
This packet tracer is a skills review packet tracer where you do a LOT of stuff. VLANS, encapsulation, DHCP, trunking, and access configuration. Tedious, but easy. For the sake of time, we will not describe why the commands used below are used. If you have a question, feel free to ask in the comments.

R1 (Router) Configuration
R1>en
R1#conf t
R1(config)#int g0/1
R1(config-if)#exit
R1(config)#int g0/1.10
R1(config-subif)#ex
R1(config)#no logging console
R1(config)#int g0/1.10
R1(config-subif)#encap dot1Q 10
R1(config-subif)#ip add 172.17.10.1 255.255.255.0
R1(config-subif)#exit
R1(config)#int g0/1.20
R1(config-subif)#encap dot1Q 20
R1(config-subif)#ip add 172.17.20.1 255.255.255.0
R1(config-subif)#exit
R1(config)#int g0/1.88
R1(config-subif)#encap dot1Q 88
R1(config-subif)#ip add 172.17.88.1 255.255.255.0
R1(config-subif)#exit
R1(config)#int g0/1.99
R1(config-subif)#encap dot1Q 99
R1(config-subif)#encap dot1Q 99 native
R1(config-subif)#ip add 172.17.99.1 255.255.255.0
R1(config-subif)#exit
R1(config)#int g0/1
R1(config-if)#no sh
R1(config-if)#exit
R1(config)#ip dhcp pool VLAN10
R1(dhcp-config)#default-router 172.17.10.1
R1(dhcp-config)#exit
R1(config)#ip dhcp pool VLAN20
R1(dhcp-config)#default-router 172.17.20.1
R1(dhcp-config)#exit
R1(config)#ip dhcp pool VLAN88
R1(dhcp-config)#default-router 172.17.88.1
R1(dhcp-config)#exit
R1(config)#ip dhcp excluded-address 172.17.10.1 172.17.10.20
R1(config)#ip dhcp excluded-address 172.17.20.1 172.17.20.20
R1(config)#ip dhcp excluded-address 172.17.88.1 172.17.88.10
R1(config)#ip dhcp pool VLAN10
R1(dhcp-config)#network 172.17.10.0 255.255.255.0
R1(dhcp-config)#exit
R1(config)#ip dhcp pool VLAN20
R1(dhcp-config)#network 172.17.20.0 255.255.255.0
R1(dhcp-config)#exit
R1(config)#ip dhcp pool VLAN88
R1(dhcp-config)#network 172.17.88.0 255.255.255.0
R1(dhcp-config)#exit
R1(config)#exit

S2 (Switch) Configuration
S2>en
S2#conf t
S2(config)#no logging console
S2(config)#int vlan 99
S2(config-if)#ip add 172.17.99.32 255.255.255.0
S2(config-if)#exit
S2(config)#ip default-gateway 172.17.99.1
S2(config)#vlan 999
S2(config-vlan)#name Blackhole
S2(config-vlan)#exit
S2(config)#int range f0/1-4
S2(config-if-range)#switchport mode trunk
S2(config-if-range)#switchport trunk native vlan 99
S2(config-if-range)#exit
S2(config)#int f0/7
S2(config-if)#switchport mode access
S2(config-if)#switchport access vlan 88
S2(config-if)#exit
S2(config)#int f0/18
S2(config-if)#switchport mode access
S2(config-if)#switchport access vlan 20
S2(config-if)#exit
S2(config)#int f0/11
S2(config-if)#switchport mode access
S2(config-if)#switchport access vlan 10
S2(config-if)#exit
S2(config)#spanning-tree mode rapid-pvst
S2(config)#int range f0/5-6, f0/8-10, f0/12-17, f0/19-24
S2(config-if-range)#switchport mode access
S2(config-if-range)#switchport access vlan 999
S2(config-if-range)#shutdown
S2(config-if-range)#exit
S2(config)#int range g0/1-2
S2(config-if-range)#switchport mode access
S2(config-if-range)#switchport access vlan 999
S2(config-if-range)#shutdown
S2(config-if-range)#exit

For the wireless router configuration, enter the devices GUI and follow Cisco's instruction steps to fully configure the device. 

Note that if you have a Default Gateway issue on the wireless router, you need to release and reassign the information under 'Status'.

2 comments:

  1. how do i open this in packet tracer version 6

    ReplyDelete
    Replies
    1. If the packet tracer version you downloaded from here is not matching yours, you will not be able to open it, nor submit it. Open the version you get from your instructor / netacad, then use the commands listed herein.

      Delete

Feel free to comment if you have a question, commendation, or concern. We love to hear your feedback!

Please do not share links to external websites if it not relevant to discussion. We reserve our right to remove any content we deem advertising.