Tuesday, March 29, 2016

CCNAv2 Completed Packet Tracer 8.2.2.7

Greetings, and welcome to seeseenayy.
Posted below is the completed packet tracer 8.2.2.7, that of which is about OSPF, a new protocol to a new chapter. OSPF is a more "deepened" version of RIP, essentially, and is easy to configure as well as easy to understand and troubleshoot.


Download(s)


Alternatively, you may use the correct commands over downloading the file. 

PT COMMANDS/TUTORIALS
*Items marked in gray (and italicized) are output strings from the router.

Router 1 Configuration Commands
R1>en 
R1#config t  
R1(config)#router ospf 10 
R1(config-router)#router-id 1.1.1.1 
R1(config-router)#network 172.16.1.0 0.0.0.255 area 0 
R1(config-router)#network 192.168.10.4 0.0.0.3 area 0 
R1(config-router)#network 172.16.3.0 0.0.0.3 area 0 
R1(config-router)#passive-int g0/0 
00:13:00: %OSPF-5-ADJCHG: Process 10, Nbr 2.2.2.2 on Serial0/0/0 from LOADING to FULL, Loading Done 00:15:07: %OSPF-5-ADJCHG: Process 10, Nbr 3.3.3.3 on Serial0/0/1 from LOADING to FULL, Loading Done 

Router 2 Configuration Commands
R2>en R2
R2#conf t 
R2(config)#router ospf 10 
R2(config-router)#router-id 2.2.2.2 
R2(config-router)#network 172.16.2.0 0.0.0.255 area 0 
R2(config-router)#network 172.16.3.0 0.0.0.3 area 0 
00:13:00: %OSPF-5-ADJCHG: Process 10, Nbr 1.1.1.1 on Serial0/0/0 from LOADING to FULL, Loading Done 
R2(config-router)#network 192.168.10.8 0.0.0.3 area 0 
R2(config-router)#passive-int g0/0 
00:16:38: %OSPF-5-ADJCHG: Process 10, Nbr 3.3.3.3 on Serial0/0/1 from LOADING to FULL, Loading Done 

Router 3 Configuration Commands
R3>en 
R3#conf t 
R3(config)#router ospf 10 
R3(config-router)#router-id 3.3.3.3 
R3(config-router)#network 192.168.10.4 0.0.0.3 area 0 
R3(config-router)#network 192.168.1.0 0.0.0.3 area 0 
00:15:07: %OSPF-5-ADJCHG: Process 10, Nbr 1.1.1.1 on Serial0/0/0 from LOADING to FULL, Loading Done 
R3(config-router)#network 192.168.10.8 0.0.0.3 area 0 
R3(config-router)# 00:16:38: %OSPF-5-ADJCHG: Process 10, Nbr 2.2.2.2 on Serial0/0/1 from LOADING to FULL, Loading Done 
R3(config-router)#passive-int g0/0

1 comment:

Feel free to comment if you have a question, commendation, or concern. We love to hear your feedback!

Please do not share links to external websites if it not relevant to discussion. We reserve our right to remove any content we deem advertising.