Monday, March 14, 2016

CCNAv2 Completed Packet Tracer 7.3.2.3

Greetings, and welcome to Seeseenayy.
Below you will find the download and tutorial for Packet Tracer 7.3.2.3.

Updated 4/6/2016 - Corrected capitalization issue with R1's configuration, thank you Max (see comments).




Please note that you must type "CISCO" as ALL CAPITALS!

You will not get completion credits if CISCO is not capitalized.

R1 Commands
R1>en
R1#conf t
R1(config)#ipv6 unicast-routing
R1(config)#ipv6 router rip cisco
R1(config-rtr)#int g0/0
R1(config-if)#ipv6 rip CISCO en
R1(config-if)#int s0/0/0
R1(config-if)#ipv6 rip CISCO en
R1(config-if)#end
R1#



R2 Commands
R2#en
R2#conf t
R2(config)#ipv6 unicast-routing
R2(config)#ipv6 router rip CISCO
R2(config-rtr)#int g0/0
R2(config-if)#ipv6 rip CISCO en
R2(config-if)#int s0/0/0
R2(config-if)#ipv6 rip CISCO en
R2(config-if)#int s0/0/1
R2(config-if)#ipv6 rip CISCO en
R2(config-if)#end
R2#


R3 Commands
R3> en
R3# conf t
R3(configure)# ipv6 unicast-routing
R3(configure)# ipv6 router rip CISCO
R3(config-rtr)# int g0/0
R3(config-if)# ipv6 rip CISCO en
R3(config-if)# interface s0/0/1
R3(config-if)# ipv6 rip CISCO en
R3(config-if)# end
R3#

4 comments:

  1. cisco needs to be in capital letters by R1 then it works

    ReplyDelete
    Replies
    1. Greetings, Max. Thanks for commenting!


      Correct, thanks for your post.
      I'll edit R1's configuration so that it is in compliance with the packet tracer's requirements.
      Good catch, let me know if you find anything else.

      Delete
  2. R3 command 'interafce s0/0/1'
    interface is spelled wrong. Other than that it's perfect

    ReplyDelete
    Replies
    1. Updated, thank you for the catch.

      Delete

Feel free to comment if you have a question, commendation, or concern. We love to hear your feedback!

Please do not share links to external websites if it not relevant to discussion. We reserve our right to remove any content we deem advertising.