Thursday, March 3, 2016

CCNAv2 Completed Packet Tracer 6.4.1.5

Hello, and welcome to my blog for CCNA.
Please read all of the text before downloading.
Below you will find completed PT / PDF files:

CCNAv2


This packet tracer is the first packet tracer for Chapter 6, which is static routing.
Below are the commands (with a tutorial) if you don't want to download.

Packet Tracer Tutorial: Explanation and Commands

R1 IP: 172.22.1.128 /26 , 255.255.255.192
R3 IP: 172.31.157.0 /25 , 255.255.255.128

To solve the PT, we have to write down to provided IP addresses (I wrote them above) and calculate it by yourselves. If you have trouble, look for "CCNA 2 Notes - Routing Summations", it should be before this post.

Note that router one is recursive, so when we add the information about next-hop, go go to router R1 and add as follows:

Diagnostic / Basic Commands
R1> en
R1# show ip route
R1# conf t

Configuration Commands
R1(config)# ip route 172.22.1.128 255.255.255.192 172.31.157.98
R1(config)# ex 

*** Pay particular attention to the addressing table, note that this route should directly point to S0/0/0 of R2.

Exit then close R1s configuration, open R3. 
Note that R3 is directly connected, so we will configure and add an outgoing interface for the router.

Diagnostic / Basic Commands
R3> en
R3# conf t

Configuration Commands
R3(config)# ip route 172.31.157.0 255.255.255.128 s0/0/1
R3(config)# ex

*** Pay attention to why we used an interface over an address on R3 for the ip route command. Like previously stated, it already has a direct connection, therefor we can use an interface over an address to obtain a functioning, working route.



2 comments:

  1. what version of PT are you using? it says that it is not compatible with the version of my PT. I tried using 6.2,6.1,5.3.3 and 5.3.2 but still not compatible

    ReplyDelete
    Replies
    1. Rever0lf,

      This packet tracer should be version 6.3.0, you may get a free download of it from the netacad website if it still available for you. Here is the packet tracer opened on my computer if it's any help to you-- https://gyazo.com/f19f5884446bdebc1311a873a4071782.

      Delete

Feel free to comment if you have a question, commendation, or concern. We love to hear your feedback!

Please do not share links to external websites if it not relevant to discussion. We reserve our right to remove any content we deem advertising.