Tuesday, February 23, 2016

CCNAv2 Completed Packet Tracer 5.4.1.2

Hello,
Welcome to my blog.


Below you will find the completed version of a packet tracer file.
The downloads are safe, completed, and completed packet tracer files.
If you need assistance with a packet tracer or any other related to this blog, please give a shout. 

CCNAv2 

Video Guide, by a supported Packet Tracer god! 


If you do not wish to use the packet tracer download, please use the following commands below. If you need help, ask below!
Router Commands
R1 > enable
R1 # configure t
R1 (config)# int g0/1
R1 (config-if)# no shut
R1 (config-if)# exit
R1 (config)# int g0/1.10
R1 (config-subif)# encap dot1Q 10
R1 (config-subif)# ip address 172.17.10.1 255.255.255.0
R1 (config-subif)# no shut
R1 (config-subif)# exit
R1 (config)# interface g0/1.20
R1 (config-subif)# encap dot1Q 20
R1 (config-subif)# ip address 172.17.20.1 255.255.255.0
R1 (config-subif)# no shut
R1 (config-subif)# exit
R1 (config)# interface g0/1.30
R1 (config-subif)# encap dot1Q 30
R1 (config-subif)# ip address 172.17.30.1 255.255.255.0
R1 (config-subif)# no shut
R1 (config-subif)# exit
R1 (config)# interface g0/1.88
R1 (config-subif)# encap dot1Q 88
R1 (config-subif)# ip address 172.17.88.1 255.255.255.0
R1 (config-subif)# no shut
R1 (config-subif)# exit
R1 (config)# interface g0/1.99
R1 (config-subif)# encap dot1Q 99
R1 (config-subif)# ip address 172.17.99.1 255.255.255.0
R1 (config-subif)# no shut
R1 (config-subif)# exit
R1 (config)# end
R1 # end

Switch Commands
*Note, when using FE configs for sw access, some of the ports may be different. Check your PT and use said ports, and then enable f0/10 if you haven't already.
S1 > enable
S1 # configure t
S1 (config)# ip default-gateway 172.17.99.1
S1 (config)# int f0/10
S1 (config-if)# exit
S1 (config)# vlan 10
S1 (configure-vlan)# name Faculty/Staff
S1 (configure-vlan)# vlan 20
S1 (configure-vlan)# name Students
S1 (configure-vlan)# vlan 30
S1 (configure-vlan)# name Guest(Default)
S1 (configure-vlan)# vlan 88
S1 (configure-vlan)# name Native
S1 (configure-vlan)# vlan 99
S1 (configure-vlan)# name Management
S1 (configure-vlan)# exit
S1 (config)# int fastEthernet0/10
S1 (config-if)# sw access vlan 30
S1 (config-if)# exit
S1 (config)# int fastEthernet0/11
S1 (config-if)# sw access vlan 10
S1 (config-if)# exit
S1 (config)# int fastEthernet0/18
S1 (config-if)# sw access vlan 20
S1 (config-if)# exit
S1 (config)# int g0/1
S1 (config-if)# swaccess vlan 88
S1 (config-if)# exit
S1 (config)# int vlan 99
S1 (config-if)# ip address 172.17.99.10 255.255.255.0
S1 (config-if)# end

No comments:

Post a Comment

Feel free to comment if you have a question, commendation, or concern. We love to hear your feedback!

Please do not share links to external websites if it not relevant to discussion. We reserve our right to remove any content we deem advertising.